ShapeChanger(R) - A New Dimension
version 2.2

Welcome to the fascinating world of ShapeChanger - A New Dimension. Here is some information to get you started.
_________________________________________________________________

INSTALLATION
ShapeChanger can either be run directly off the CD-ROM or installed on your hard drive. Installation will require 30MB of hard disk space. To install ShapeChanger, click the "Install" button on the start up screen. If the CD-ROM does not open automatically when you insert it in the drive, find and double-click the "Startscr.exe" file on the CD. This will bring up the start up screen and present you with installation options.

To uninstall ShapeChanger, use the Add/Remove Programs Control Panel, or double-click the "Unwise.exe" file in the ShapeChanger directory.
__________________________________________________________________

HOW TO USE SHAPECHANGER/USER'S MANUAL
Information about ShapeChanger is included both in the Help screens and in the User's Manual. The ShapeChanger User's Manual is in Adobe Acrobat PDF format. To read and print out this manual, you must have Adobe Acrobat 3.0 or higher installed on your computer. If you need to install Acrobat, it is included on the CD-ROM. Click the "Install" button and choose the correct option for your computer configuration. Acrobat can also be downloaded from the Adobe web site at http://www.adobe.com.

To access the manual after ShapeChanger and Acrobat are installed:
Click Start/Programs/Adobe/Acrobat Reader.
Under the Acrobat File menu, click Open.
Find the ShapeChanger directory on your hard drive and double-click to open it.
Click on the "scmanual.pdf" file, then click Open.

Once you have opened the manual, you may print it out by using Print command under the Adobe Acrobat File menu.

Use the same procedure if you are running ShapeChanger directly off the CD, only this time
you will open the "scmanual.pdf" file found on the ShapeChanger CD instead of your hard drive. 
__________________________________________________________________


ShapeChanger is manufactured by Mindsong, Inc., P.O. Box 13774, St. Paul, MN 55413, http://www.mindsonginc.com. 

For technical support for ShapeChanger, please contact Mindsong at info@mindsonginc.com.



(C)1999 Mindsong, Inc. 
ShapeChanger U.S. Patent No. 5,830,064