Application module: Containment of individual product ISO/TS 10303-1168:2005(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

4 Information requirements

This clause specifies the information requirements for the Containment of individual product application module. The information requirements are specified as the Application Reference Model (ARM) of this application module.

NOTE 1  A graphical representation of the information requirements is given in Annex C.

NOTE 2  The mapping specification is specified in 5.1. It shows how the information requirements are met by using common resources and constructs defined or imported in the MIM schema of this application module.

The following EXPRESS specification begins the Containment_of_individual_product_arm schema and identifies the necessary external references.

EXPRESS specification:

*)
SCHEMA Containment_of_individual_product_arm;
(*

4.1 Required AM ARMs

The following EXPRESS interface statements specify the elements imported from the ARMs of other application modules.

EXPRESS specification:

*)
USE FROM Product_as_individual_arm;    --  ISO/TS 10303-1164

USE FROM Product_version_relationship_arm;    --  ISO/TS 10303-1020
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Product_as_individual_arm ISO/TS 10303-1164
Product_version_relationship_arm ISO/TS 10303-1020

NOTE 2   See Annex C, Figures C.1and C.2 for a graphical representation of this schema.

4.2 ARM entity definition

This subclause specifies the ARM entity for this module. The ARM entity is an atomic element that embodies a unique application concept and contains attributes specifying the data elements of the entity. The ARM entity and definition is specified below.

4.2.1 Containment_of_individual_product   EXPRESS-GMapping table

A Containment_of_individual_product is a containment relationship between individual products.

The containing product encloses the contained product to protect the contained product or to prevent the contained product from moving or dispersing.

EXAMPLE    The tank with tag T_27 is an individual product. The batch of fluid with identifier 2001-10-30/B2 is an individual product.

The relationship between tank T_27 and batch 2001-10-30/B2, that indicates the batch of fluid is contained within the tank, is a containment of individual product.

NOTE    This entity is identical to containment_of_individual in ISO 15926-2, where the relationship is between individual products.

EXPRESS specification:

*)
ENTITY Containment_of_individual_product
  SUBTYPE OF (Product_version_relationship);
  SELF\Product_version_relationship.relating_version : Product_as_individual_version;
  SELF\Product_version_relationship.related_version : Product_as_individual_version;
END_ENTITY;
(*

Attribute definitions:

relating_version: an instance of Product_as_individual_version that is the container.

related_version: an instance of Product_as_individual_version that is the contained individual product.



*)
END_SCHEMA;  -- Containment_of_individual_product_arm
(*


© ISO 2005 — All rights reserved